-
-
-
-
J5 MediJet Spine Models
Stratasys J5 MediJet
The Stratasys J5 MediJet™ is setting a new standard for medical modelling. With multiple materials and multi-colour capabilities, academic medical centers, hospitals, and medical device companies can create brilliantly vivid anatomical models, and drilling and cutting guides* that are sterilisable and biocompatible.
Service multiple departments and create more medical models with less handling — all within a small footprint. Print pre-surgical planning models, training and education models, surgical guides*, and medical device development models with a certified system — all on one platform.
*with approved 3rd party 510k cleared segmentation software
Performance: Multi-material and multicolour capabilities allow you to create brilliantly vivid anatomical models and drilling and cutting guides that are sterilizable and biocompatible, with a certified system — all on one platform.
Key Uses: Training and education models, surgical guides and tooling, medical device development models, and pre-surgical planning models.
Looking for pricing?
To get you the most accurate and up-to-date pricing, it’s always best to contact our team either by phone or the enquire now form provided. We will be able to break down all the figures for you and include any additional cost for post-processing equipment, training and support (if required). And not just capital costs either, as we have many options to help you acquire the best 3D printer, which include finance. Lease rentals will allow you to spread the cost of your investment over 3-5 years, from as little as £900.00 +VAT per month for a mid level PolyJet 3D printer.
- Build Size: 140 x 200 x 190mm
- Software Compatibility: GrabCAD Print
- Supported Sterilization Process: Steam (4 minutes at 132 °C), Gamma (25 – 50 kGy), EtO (specifications available upon request)
- System Size: 651 x 661 x 1511mm
- Power Requirements: 100 – 240 VAC, 50 – 60 HZ, 10A, 1 phase
- Layer Thickness: Horizontal build layers down to 18 microns (0.0007 in.)
- Support Materials: SUP710™ (Water Jet removable)
- Operating Conditions: Temperature 18 – 25 °C (64 – 77 °F); relative humidity 30 – 70% (non-condensing)
Currently there are no case studies assigned. You can view our full range of case studies here.
Leasing 3D Printers
If you’re looking to 3D printer leasing, Tri-Tech 3D provide direct rental contracts on our full range of 3D printers, which can include post processing equipment and extended warranty, making your investment into 3D printing both affordable and help plan your annual expenditure.
How do I lease a 3D Printer?
The process is quite simple! First, you’ll need to undergo a credit check. This can be done quickly, usually within 24-48 hours. If you’re a new start-up company or sole trader, it may be more difficult to obtain finance, but deposit payments and directors guarantees can help. Talk to a leasing company to get a pre-proposed finance plan without any obligation. Once approved, you’ll know what value technology you can consider.
Funding in the most part, is provided by our sister company Stanford Marsh Finance (a division of the Stanford Marsh Group) or via our numerous strategic finance partners/brokers.
Rates are frequently checked to ensure competitiveness in the market place and you will find our terms highly attractive. With options such as fixed term contracts, step rentals which make payments lower in the earlier years allowing time to grow the use from your new device. Or deferred payment, enabling you to benefit from the technology ahead of when you start paying.
Why lease 3D Printers?..
Not only can leasing be financially beneficial to companies, but it can also give you the ability to remain ahead and current with technology. It also means your entry point to utilisation of a professional 3D printer is far more affordable than you may think – a professional 3D printer from as little as £299 per month, (including a wash system and 12-months support).
Furthermore, if like many companies today you are outsourcing 3D printing via a 3D Print Bureau, you are already spending an amount each month that when converted to a lease, could represents an in-house option at no extra cost (savings possibly). Either talk to one of our team, or send us details of your average spend and we can help provide an ROI report.
In addition to our excellent rates, as an end user dealing directly with one vendor for finance, equipment and after sales care, your rental agreement will provide you with a future flexible upgrade path. We’ve enabled companies to acquire new technology prior to the completion of the minimum rental period, without the usual high termination figure charged by outside finance agencies.
All finance is subject to approval and none of the solutions detailed above are guaranteed to suit all scenarios. What we can promise however, is we will do our utmost to make the finance of your 3D Print solution as affordable and easy as possible.
What are the main benefits of leasing a 3D printer?
Leasing a 3D printer has many benefits compared to outright purchase. Leases are usually affordable, good for cashflow, and allow you to invest in more equipment without large amounts of money upfront. If you already outsource 3D print work, leasing can help you bring production in-house and may improve workflow and protect your intellectual property. Additionally, there are well-documented taxation benefits to companies in regard to leases.
When to lease VS buy a 3D printer?
When deciding whether to lease or buy a 3D printer, consider your needs. If you have a proven requirement and plan to run a system to its end-of-life, outright purchase may be best. However, if you want to keep your options open and stay up-to-date with new technology, leasing provides flexibility to upgrade at the end of a minimum leasing period.
I’m not ready to lease or buy a 3D printer – is a service an option?
If you’re not ready to lease or buy a 3D printer, outsourcing to a print bureau could be a great option. Companies like 3D Print Bureau offer access to a team of experts running a variety of professional 3D printers in different technologies. This allows you to pay as you go for the end part until your volume hits a level where bringing production in-house makes sense.
If you are interested in further information, please contact us.
J5 MediJet 3D Printer Brochure Downloads
New to 3D
Printing or looking
for some support?
- Call: 01782 814551
- Email: info@tritech3d.co.uk
Why do companies buy a 3D Printer?
That’s a good question and asking it today we think has changed significantly from had it been posed 15-years or so ago. Traditionally a 3D Printer provided solutions to Rapid Prototyping, a functional model to prove fit, form & function, or to convey a design intent to a client (better than a 2D drawing, or even rendered 3D imagery).
And when that was the end requirement, the focus was more on choosing a manufacture who built reliable devices that print right first time and in the professional sector, where repeatable accuracy could be achieved.
Why do people buy from Tri-Tech 3D?
We could say we are a well-established company, part of a larger group, with years of industry experience, six UK locations and our own finance company. All of which is true, but also sounds familiar to what the others may say and in some cases, a “so what”.
Why we think our customers buy from Tri-Tech 3D and not just once, is we are a ‘customer centric’ business who treat people how we like to be dealt with ourselves. We want to know what you will get out of a system investment, we want to help drive that adoption and we want to see customers being successful.
