Quill Vogue Cold Soak Box/XL

Efficient, Quiet Support Removal for Stratasys PolyJet Parts

This high-performance Cold Soak Box from Quill Vogue rapidly removes a range of soluble support material from complex geometries and deep recessed areas without damaging surfaces.

The Cold Soak Box allows operatives to control the temperature, time and type of solution used. The system uses a cooler unit to keep the water temperature below 30 degrees, as temperatures higher than this can often distort Polyjet 3D printed parts.

This wash system is safe, reliable and easy to use, providing operatives with rapid, hands-free post-processing, speeding post-processing times and improving production efficiency.

Technical Specifications

Cold Soak Box

• Footprint: 1220mm x 650 x 1030
• Water Tank: 500mm x 400 x 360
• Internal Basket: 480mm x 365 x 270
• Accommodates Parts: 470mm x 360 x 350
• Water Tank Capacity: 50 litres
• High Performance Pump: Up to 62 litres per minute
• Weight: 91kg
• Power Supply: 240 volt AC/50Hz/1.6kW single

Cold Soak Box XL

• Footprint: 1610mm x 1040 x 1380
• Water Tank: 970mm x 965 x 700
• Internal Basket: 920mm x 920 x 295
• Accommodates Parts: 914mm x 914 x 610
• Water Tank Capacity: 500 litres
• High Performance Pump: Up to 109 litres per minute
• Weight: 755kg
• Power Supply: 415volt/3 phase/32amp