Stratasys Platinum Distribution Partner
Advanced 3D Printers from the UK leading experts
Request call back 3D Print Callback
Objet Fortus
  • 3D Printer UK
  • 3D Printer UK
  • 3D Printer UK
  • 3D Printer UK
  • 3D Printer UK
  • 3D Printer UK
  • 3D Printer UK
  • 3D Printer UK

Stratasys FORTUS

For Direct Digital Manufacturing

Our Production Series takes 3D printing to a new level - manufacturing. You’ll find our Production Series 3D Printers on factory floors in nearly every industry because they’re the workhorse every manufacturer needs. NASA, Ducati and BMW to name but a few...


With the introduction of the new Fortus 380mc and 450mc printers, you can now build parts quicker and more efficiently than ever before. These curtting-edge printers incorporate a new touch screen interface that is both intuitive and easy to use

Stratasys Fortus 250mc Build area: 254 x 254 x 305 mm (X,Y,Z) Entry Level 3D Production System more info

What is additive manufacturing?

Freed from the constraints of traditional (subtractive) manufacturing methods, additive manufacturing allows manufacturing engineers to produce tools that were previously considered far too complex to make economically. Stratasys Production Series 3D Printers also help you make faster changes to your manufacturing line by printing tools in just hours - taking inventories digital. The sky’s the limit. If you can picture it on your manufacturing floor, you can build it with a production 3D printer from Stratasys.

Fortus 250mc overview

The Fortus 250mc is our most affordable 3D production system, and it delivers flexibility and reliability. It's the only Fortus 3D Production System that uses ABSplus, which is up to 40 percent stronger than our standard ABS material.

System Highlights

  • Three layer resolutions
  • Nine material colors plus custom color options
  • Most affordable Fortus system

System Features

Model Material:   ABSPlus P430 

Support Material: Soluble support for ABSplus

Material Bays:

  • 2 auto-load cartridge bays of 56.3 cu. in. each
  • 1 build material bay
  • 1 support material bay

Build Size:     254 x 254 x 305 mm (10 x 10 x 12 in.)

Layer Thickness:
Multiple build speed options for fine feature detail and smoother surface finish.

  • 0.330 mm (0.013 in.)
  • 0.254 mm (0.010 in.)
  • 0.178 mm (0.007 in.)

Part Accuracy:
Parts are produced within an accuracy of ± .0095 inch (± .241 mm)*

*Note: Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield.

Network Connectivity:
10/100 base T connection. Ethernet protocol.

Power Requirements:
110-120 VAC, 60Hz, minimum 15A dedicated circuit; or 220-240 VAC 50/60 Hz, minimum 7A dedicated circuit.

Regulatory Compliance:
CE / ETL

Special Facility Requirements:

  • Maximum room temperature of 86° F (30° C)
  • Relative humidity range: 30-70%, non-condensing

*Note: Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield.

 

Stratasys Fortus 900mc Build area: 914 x 609 x 914 mm (X,Y,Z) High throughput and high temperature materials more info

FORTUS 900mc 3D Production System Overview

Part tolerances distinguish the Fortus 900mc from other 3D systems. Designed and manufactured for the highest accuracy and repeatability, the 900mc speeds up conceptual modelling and functional prototyping while allowing for multiple iterations. The Fortus 900mc 3D Production System also has our highest throughput and envelope volume, making it appropriate for fabrication and assembly tools, as well as end-use parts.

System Highlights

  • Largest build envelope and highest throughput
  • Precision ball-screw technology for increased accuracy, repeatability and reliability
  • Model materials available to make parts for high-heat applications

Model Material:

  • ASA
  • ABS
  • ABS-M30
  • ABS-M30i
  • ABS-ESD7
  • PC ABS
  • PC
  • PC-ISO
  • ULTEM *9085
  • PPSF / PPSU
  • FDM Nylon12

Support Material:

  • Soluble Support - ABS-M30, ABS-M30i, ABSi, ABS-ESD7, PC-ABS
  • Breakaway Support - PC, PC-ISO, ULTEM 9085, PPSF / PPSU

Material Bays:

  • 2 Build material bay
  • 2 support material bay

Build Size: 914 x 610 x 914 mm (36 x 24 x 36 in.)

 

Layer Thickness:
Multiple build speed options for fine feature detail and smoother surface finish.

  • 0.330 mm (0.013 in.)
  • 0.254 mm (0.010 in.)
  • 0.178 mm (0.007 in.)

Part Accuracy:
Parts are produced within an accuracy of +/- .0035 inch or +/- .0015 inch per inch, whichever is greater (+/- .089 mm or +/- .0015 mm per mm, whichever is greater).*

*Note: Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield.

Network Connectivity:
10/100 base T connection. Ethernet protocol.

Power Requirements:
 

  • 230VAC nominal 3-phase service with 5% regulation.
  • 230VAC as measured phase-to-phase; 50 Hz or 60Hz; 40 Amp circuit.

 

Regulatory Compliance:
CE

Special Facility Requirements:

None

*Note: Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield.

Stratasys Fortus 450mc Build area: 406 x 355 x 406 mm (X,Y,Z) Performance and high temperature plastics more info

FORTUS 450mc 3D Production System Overview

The new Fortus450mc 3D production system lets you build, accurate, repeatable parts faster than ever before. Produce jigs, fixtures, factory tooling and end-use parts, as well as functional prototypes to withstand stringent testing. With four layer thicknesses to choose from, you can strike the right balance between strength, detail, and FDM’s fastest build time.

For maximum time savings, the Fortus 450mc printer builds complex parts faster than their predecessors. Featuring an all-new touchscreen interface for straightforward operation and maintenance.

Build parts as large as 406 x 355 x 406 mm (16 x 14 x 16 in.). The Fortus 450mc works with 9 standard, engineering and high-performance thermoplastics.

Model Material:

  • ASA
  • ABS
  • ABS-M30
  • ABS-M30i
  • ABS-ESD7
  • PC ABS
  • PC
  • PC-ISO
  • ULTEM *9085
  • ULTEM *1010
  • PPSF / PPSU
  • FDM Nylon12

Support Material:

  • Soluble Support - ABS-M30, ABS-M30i, ABSi, ABS-ESD7, PC-ABS
  • Breakaway Support - PC, PC-ISO, ULTEM 9085, ULTEM 1010, PPSF / PPSU

Material Bays:

  • 2 Build material bay
  • 2 support material bay

Build Size: 406 x 355 x 406 mm (16 x 14 x 16 in.)

 

Layer Thickness:
Multiple build speed options for fine feature detail and smoother surface finish.

  • 0.330 mm (0.013 in.)
  • 0.254 mm (0.010 in.)
  • 0.178 mm (0.007 in.)
  • 0.127 mm (0.005 in.)

 

System size/weight:

127 x 90.17 x 194.31 cm (50 x 25.5 x 76.5 in.)/with crate: 680 kg (1,500 lbs.), without crate: 601 kg (1,325 lbs.)

Achievable accuracy:
Parts are produced within an accuracy of ± .127 mm (± .005 in.) or ± .0015 mm/mm (± .0015 in/in), whichever is greater. (Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield.)

Network communication:
10/100 base T connection; Ethernet protocol

Power requirements:
230 VAC, 50/60 Hz, 3 phase, 16A/phase (20 amp dedicated circuit required)

Regulatory compliance:
CE

Special facility requirements:
None

Stratasys Fortus 380mc Build area: 355 x 305 x 305 mm (X,Y,Z) Standard and Engineering plastics more info

FORTUS 380mc 3D Production System Overview

The new Fortus 380mc 3D production system lets you build, accurate, repeatable parts faster than ever before. Produce jigs, fixtures, factory tooling and end-use parts, as well as functional prototypes to withstand stringent testing. With four layer thicknesses to choose from, you can strike the right balance between strength, detail, and FDM’s fastest build time.

For maximum time savings, the Fortus 380mc printer builds complex parts faster than their predecessors. Featuring an all-new touchscreen interface for straightforward operation and maintenance.

Build parts as large as 355 x 305 x 305 mm (14 x 12 x 12 in.) significantly faster than the Fortus 360mc, especially for complex geometries. The Fortus 380mc offers the same fast build time as the 400mc, and works with seven standard and engineering thermoplastics. 

Model Material:

  • ASA
  • ABS
  • ABS-M30
  • ABS-M30i
  • ABS-ESD7
  • PC ABS
  • PC
  • PC-ISO
  • PPSF / PPSU
  • FDM Nylon12

Support Material:

  • Soluble Support - ABS-M30, ABS-M30i, ABSi, ABS-ESD7, PC-ABS
  • Breakaway Support - PC, PC-ISO, PPSF / PPSU

Material Bays:

  • 1 Build material bay
  • 1 support material bay

Build Size: 355 x 305 x 305 mm (14 x 12 x 12 in.)

 

Layer Thickness:
Multiple build speed options for fine feature detail and smoother surface finish.

  • 0.330 mm (0.013 in.)
  • 0.254 mm (0.010 in.)
  • 0.178 mm (0.007 in.)
  • 0.127 mm (0.005 in.)

 

System size/weight:

127 x 90.17 x 194.31 cm (50 x 25.5 x 76.5 in.)/with crate: 680 kg (1,500 lbs.), without crate: 601 kg (1,325 lbs.)

Achievable accuracy:
Parts are produced within an accuracy of ± .127 mm (± .005 in.) or ± .0015 mm/mm (± .0015 in/in), whichever is greater. (Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield.)

Network communication:
10/100 base T connection; Ethernet protocol

Power requirements:
230 VAC, 50/60 Hz, 3 phase, 16A/phase (20 amp dedicated circuit required)

Regulatory compliance:
CE

Special facility requirements:
None


View Applications Stratasys 3D Printers Applications

Fortus 250mc

Model material:  ABSPlus P430

Support Material: Soluble support for ABSplus

Fortus 360mc

Model Materials:

  • ASA
  • ABS M30
  • PC ABS
  • PC
  • FDM Nylon12

Support Material: Soluble Support for ABS-M30 and PC-ABS, Breakaway Support for PC

Fortus 400mc

Model Materials:

  • ASA
  • ABS
  • ABS-M30
  • ABS-M30i
  • PC ABS
  • PC
  • PC-ISO
  • ULTEM *9085
  • PPSF
  • FDM Nylon12

Support Material:

  • Soluble Support - ABS-M30, ABS-M30i, ABSi, ABS-ESD7, PC-ABS
  • Break Away Support - PC, PC-ISO, ULTEM 9085, PPSF/PPSU

Fortus 900mc

Model Materials:

  • ASA
  • ABS
  • ABS-M30
  • ABS-M30i
  • ABS-ESD7
  • PC ABS
  • PC
  • PC-ISO
  • ULTEM *9085
  • PPSF / PPSU
  • FDM Nylon12

Support Material:

  • Soluble Support - ABS-M30, ABS-M30i, ABSi, ABS-ESD7, PC-ABS
  • Breakaway Support - PC, PC-ISO, ULTEM 9085, PPSF / PPSU

 

 

 

 

 

 

 

 

Contact us

* All fields are required






Got a question? Get in touch.